Nami Motor Compatibility
AS OF 10/28/22
There are 2 types of the motors in regards to power, the 1000w for the 28AH model that comes with 30A controllers and 1500 W for the 32AH and 35AH that comes with the 50A controllers.
Version 1 35Ah 50A Controllers
NO LONGER AVAILABLE, ONLY FOR REFERENCE, USE V1.5 MOTOR
- Old style covers ( Similar to wolf warrior )
- Bullet connectors
- JST Plug for Hall Sensor Cables
- Interchangeable with V1.5
- Spacer Underneath Disc Rotor
- Requires 3mm and 4mm washer on each side
- Designed for 152mm swingarm width
- Shopify: NAM-BUR-FR_MOTOR, NAM-BUR-RR_MOT
Version 1.5 32Ah 50A Controllers
- New Style Covers ( Finned )
- Larger Bearings
- Single 4mm washer is needed on both sides
- Bullet Connectors
- JST Plug for Hall Sensor Cables
- Interchangeable with V1
- Designed for 152mm swingarm width
- NAM-B1.5-RR_MOTOR, NAM-B1.5-FR_MOTOR
Version 2 “ Burn-E 2 “ 28AH 30A Controllers
- New Style Covers
- 1000W Motor
- Waterproof Quick
- Connector for Phase Wires and Hall Sensors
- Designated with a “B” in the number on the side of the motor
- Single 4mm washer on each side
- Lighter in weight than the MAX motors
- Designed for 158mm swingarm width
- Only Compatible with this modelShopfiy: NAM-B28-FR_MOTOR, NAM-B28-RR_MOTOR
Version 2 “ Burn-E 2 MAX “ 32AH 50A Controllers
- New Style Covers
- Waterproof Quick Connector for Phase Wires and Hall Sensors
- Heavier Than Burn-E 2 Motors
- Single 4mm washer on each side
- Designed for 158mm swingarm width
- Is compatible with both MAX and the “2” but really should only be used as a last resort
- Shopify: NAM-BMX-FR_MOTOR, NAM-BMX-RR_MOTOR